|Software||:||CO2 XP (opt)system|
CO2 Laser Oscillator
CO2 laser oscillator, which uses CO2 gas as the operation material, is one kind of gas laser oscillator. The discharge tube is generally made by glass or quartz, and filled with CO2 and other accessorial gases (mainly helium and nitrogen gas, and a bit hydrogen and xenon gas as well). The electrode is commonly hollow nickel cylinder. One end of the resonant cavity is gilded holophote; another is half reflector made by grinded germanium or gallium arsenide. When add high voltage (direct current or low frequent alternating voltage commonly) to the electrode pole, the glow discharge occurs in the discharge tube, then the laser with wavelength around 10.6 micron will be outputted from one end of the germanium glass. In general, to a better tube, discharge area with around 1 meter can output continuous power 40~60W.
CO2-H50 Laser Marker
CO2-H50 laser marker is one of the leading products of market, which has the advantages of advanced function, small size and high cost performance. This machine adopts US laser oscillator and high-speed fine servo-motor (for scanning lenses) combining Han’s laser self-developed control software. It is a high technology product integrating laser technology, fine mechanics, electronics technology and computer science, and widely applied in electronics, computer, clock and gift etc.
The control software runs on WINDOWS XP as the operation stage, using English interface, it is easy for operation and learning. The software has perfect graphics process function, supports the creating, moving, extending, rotating, imaging, copying, deleting and other functions. The software can also be customized according to the customer’s requirements.
CO2-H50 laser marker is composed by laser power supply, XY scanning lenses and driver, optical system, cooling system, computer control system and worktable etc.
CO2-H50 laser maker can manage non-metal marking, and is widely used in craftwork, gift, methyl methacrylate, clothing, leather, wood, paper, food package, electric component, PCB, soft circuit board, ceramics basal piece, semiconductor, crystal glass, plastic linker, silicon rubber keystroke, SMD component and the graphics context carving on the other kinds of material.
|Marking laser||CO2 laser||Wavelength: 1064nm|
|Min. character size||0.12mm|
|Min. line width||0.6mm|
|Display||17 inch LCD Monitor display|
|Software||CO2 XP (opt)system|
|Character type||True type font||True Type font installed in PC|
|Update character||Automatic calendar, automatic time limit calculation, shift code setting, automatic counter, rank marking|
|Barcode||CODE39, 2 of 5, Codabar, CODE 128|
|2D code||QR code, Data Matrix (ECC200)|
|Bitmap format||BMP, JPG, PNG, TIF, PCD etc.|
|Laser marking format||Fixed point, straight line, circle, oval etc.|
|Terminal block Input/ Output||Input||Error Reset, Trigger Inhibit, Emergency Stop, Mark-Laser control, Laser control, Count-up, Count-down, Counter Reset, No./Value set, Fix Program No., Encoder Pulse, Trigger|
|Output||Laser indicator, Marking, Warning|
|System safety level||IP54|
|Cooling method||Water cooling|
|Environmental resistance||Ambient temperature||15℃~30℃|
|Electrical source requirement||220V/ 10A|
|Laser oscillator||48-3||1||US SYNRAD|
|Lens||140×140||1||US II-VI/ Singapore Wavelength|
|Scanner system||High speed scan||1|
|Expander||5 times||1||US II-VI/ Singapore Wavelength|
Requirement of the working condition